Quantitative filter papers (ashless)
Our ashless filter paper grades are made with 100% cotton linters .
As quantitative analysis requires a high purity, these papers are being washed out with acid and finally cleaned with demineralized water.
The ash content is less than 0,008 %.
Grade 11 Fast filtering

Wide pores filter paper used for coarse and voluminous precipitates such as iron- aluminium- and chromium hydroxide, Si- determination in steel and pig iron analysis.
Information to order

Grade 12 Medium fast filtering

Most commonly used grade for coarser precipitates such as lead- iron- and silver sulphide; alcali carbonates; lead chromate, arsenic, antimony, cadmium, food stuffs
Information to order

Grade 13 Medium filtering

Medium pored filter paper used for fine precipitates such as magnesium ammonium phosphate, calcium oxalate, magnesium ammonium arsenate, coarser forms of barium sulphate.
Information to order

Grade 14 Slowly filtering

Narrow pores filter paper used in fine precipitates such as lead dioxide, calcium fluoride, nickel sulphide, zinc sulphide, dioxide and molybdate of lead.
Information to order

Grade 15 and 18 Very slowly filtering

Fine pores filter paper used for extremely difficult filtration conditions such as cold barium sulphate, metastannic acid, cuprous oxide.
Information to order gr. 15
Information to order gr. 18
Grade 32 Low grease content

Determination of grease content in dairy products (cheese, milk).
Information to order

Applications
Chemical industry
Food industry
Beverage industry
Atmospheric analysis
Soil analysis
Technical specifications
  Weight Thickness Pore size Filtration vel. Burst strength
Grade g/m² mm µm sec* kg/cm²
11 84 0,18 12-15 10 >0,20
12 84 0,17 8-12 20 <0,20
13 84 0,16 5-8 50 >0,20
14 84 0,15 3-5 100 >0,20
15 84 0,14 2-3 180 >0,20
18 100 0,16 1-2 250 >0,20
32 80 0,16 8-12 20 >0,20
*according to DIN 53137